Adding more than one Flock of Birds

[asimbh]

Thanks!

But I still have the same problem. I get the data from the master module but not from the second bird. It says could not find the bird on com1. Would please let me know the hardware configuration you are using for double check though I'm reasonably sure that the configuration I have are correct.

Thanks, much appreciated

[giancamati]

HI,

you should check master dipswiches and secondary dipswitch. and the connect the two birds by the FBB port you can find on the back.

For the master dipswitch I have 1,2,3 DOWN
4,5,6 up
7 down
8 up

for the secondary
1-2-3 DOWN
4-5 UP
6 DOWN
7 - 8 UP

Good luck
Giancarlo