About Corner Cave Room..using PPT System on Remote Machine

[Jeff]

For post-process plug-in you should only need:

Marker ID
PPT Eyes
PPT Wand

If you're connecting the PPT wand to the Vizard machine, you should not have the PPT wand plug-in in PPT Studio. The wand orientation and analog/button data can be read directly in Vizard using the wand local options under tracker and inputs in vizconnect.

There should be 3 markers being used. 1 and 2 are for the eyes. 3 is for the wand. The PPT Eyes plug-in should specify markers 1 and 2, not 1 and 3. PPT Eyes will combine 1 and 2 into just marker 1 with orientation.

The screenshot shows the cameras are not calibrated. Follow the instructions in the PPT documentation to calibrate.

In vizconnect, you'll want to connect to 2 PPT trackers, one for the eyes and one for the wand. The preset option for cornercavern should already have it set like that. However, the preset assumes the wand is connected directly to Vizard for orientation data and input data. You can change those options in the advanced configuration if you need to have the wand connected through PPT Studio.

[rajnish_xenium]

Hi Jeff..
Thanx for ur last post..
Jeff..i have connected my Wand and Eyes through PPT studio running on different machine..and not on Vizard Machine..
So i have added PPT wand as input..and connected by assigning IP address in Vizconnect Advanced configuration set up.. and getting the Yaw,Pitch roll but not x,y,z..



So what should be done..as per ur logic..to get proper orientaion..as and i have to make an Corner Cave like this...
Please watch this video jeff..and suggest me to to get the exact same result as shown in the video..

YouTube Video Link:https://www.youtube.com/watch?v=7qHPwqSsFZU

Waiting for ur reply Jeff..
Mr.Rajnish Vishwakarma
(Developer at Xenium Digital Pvt Ltd,Mumbai)

[rajnish_xenium]

Jeff please also let me know to proceed for 3D Glasses..or to add as a tracker..in VizConnect...

Or else the attachement which i attached and posted earlier..(add 3 d glasses as a normal ppt from vizconnect)
Please show me how to connect to 3 d glasses through VizConnect...
Please share step by step..(all steps) to do with ViZConnect..
i have my PPT Studio running on different machine(not on vizard running machine)
Please reply for this post and the last post(***) which i posted.

Mr.Rajnish Vishwakarma
(Developer-Xenium Digital Pvt Ltd,Mumbai)