Intersense IS-900 : Button Toggle?

[rajnish_xenium]

Hi Jeff..thanx for the referene for Viz Connect..
I got the want connected to the viz connect using Vizard 5... i also got the Status of Wand&Signal and datas of Yaw roll and pitch.. in the VizConnect...
My Prset configuration Script...which was
..A Corner Caven with PPT Configuration..

i got the a Preset Configuration Script...and i saved as ..'corner_cave.py' file..instead of 'vizconnect_config.py'..

The code of 'corner_cave.py' file is...



------------------

Now i want to create a script in which i want to get the wand signals and Button data and inputs data..in my newly created script..suppose..'navigation.py' in which ill move my viewpoint with refrefence to Wand JoyStick and Button Data and Inputs Data..from The wand which is active in VizConnect Window...

...Jeff please help me to achieve this...as i m alone working on it..and i will do it..

I want to create another script..in whioch i should navigate my ViewPoint with the help of wand..
I know that ..
In my newly script.'navigation.py'..
i have to write..the line as well

code:
import vizconnect
vizconnect.go('vizconnect_config.py')

or:

# load vizconnect configuration file
import vizconnect
vizconnect.go('vizconnect_config.py')

#get a handle to the input by name
input = vizconnect.getInput('mouse_buttons')

or:

import vizconnect
vizconnect.go('vizconnect_config.py')

keyTracker = vizconnect.getTracker('keyboard').getNode3d()
..

Please help me with exact code of wand helping me to move my Viewpoint...

Waiting for ur reply Jeff..Thanx..for the last help..Thanx a lot...

Mr.Rajnish Vishwakarma(Developer at Xenium Digital Pvt Ltd)
..Waiting for ur reply..

[rajnish_xenium]

Hi jeff please find the code of ...


i got the a Preset Configuration Script...and i saved as ..'corner_cave.py' file..instead of 'vizconnect_config.py'..

The code of 'corner_cave.py' file is attached as a file ...in the doc file.

The attached '.doc' file contains the code of ...'corner_cave.py' file..instead of 'vizconnect_config.py'..

Note :

'vizconnect_config.py' is same as 'corner_cave.py'
I have just changed the name..

[Jeff]

The vizconnect file maps the wand input signals to the wand magic carpet transport in the transport > mappings section. Is the wand connecting in vizconnect under the inputs tab? Can you see the position and orientation of the transport changing in the transport tab (press the status button)?

[rajnish_xenium]

Yes now it is working..fine..yesw now my wand is navigating a transport..
now..i want to navigate into a Plane Factory..or airport..and also inside..into the interior part of the plane..with wand..but want only my MainView with my wand not the transport..
How can i move my MainView with the wand..Analog Buttons..with the JoyStick on Wand with PPT-E System.

Waiting for ur reply Jeff..thanx for ur reply..

Mr.Rajnish Vishwakarma(Developer at Xenium Digital Pvt Ltd,Mumbai)