Failed to load plug-in: 'immersion.dle'
Hi all,
I have just this one line in my code: immersion = viz.add('immersion.dle') but I get this error ************************************************** **************************** ** Loading Vizard2.py ************************************************** **************************** ** ERROR: Failed to load plug-in: 'immersion.dle' ** Load Time: 0.00 seconds If I try to do this: vrpn = viz.add('vrpn7.dle') everything works fine, and both files are in the same folder. What am I doing wrong?:confused: |
Do you have Immersion's VirtualHand SDK installed on your system? It is required for the plugin to load.
|
Thank you for your post.
But unfortunately I have installed the SDK, and still it does not work?!? :confused: Any other ideas? :) |
Which version of the VirtualHand SDK is installed, is it the latest one?
|
Hi again,
ok so after a while we tried this glove again. We are making progress, but it still does not work. What is working now: - the DCU shows the cybertouch glove and its movements correctly - in the DCU we can do the test stuff and the vibrators all work fine - we can load the immersion.dle now (I installed the latest update VirtualHandSDKSetupV2_10.exe of the SDK from this site The problem: - When adding this line glove = immersion.addCyberTouch() we get this error: ************************************************** ******** ** Loading Vizard2.py ************************************************** ******** immersion.dle Immersion Extension ** ERROR: Failed to connect to CyberTouch. Make sure Device Manager is running. Initialization Failure NETWORK: APPEARS TO BE DISCONNECTED(-101) for C:\Program Files (x86)\Immersion Corporation\VirtualHand\ ** ERROR: Failed to create extension sensor with immersion.dle ** Load Time: 0.23 seconds The DCU is running, it shows a glove. Could it lie in the fact that we use 32bit-Vizard, but only have 64bit-Virtual Hand SDK? If so, how can we solve it? We have installed the VirtualHand SDK from the CD in this folder: C:\Program Files\CyberGlove Systems\VirtualHand SDK but the update installed itself into this folder: C:\Program Files (x86)\Immersion Corporation\VirtualHand. |
Ah and the version of the SDK is 3.1.1 (64bit)
|
Are you using a glove from Immersion or CyberGlove Systems?
If you are using a CyberGlove Systems glove, then you need to use the cyberglove.dle extension, instead of immersion.dle. Also, if you are running on a 64-bit machine, things get a little more complicated. You need to install the 64-bit drivers for the glove. However, Vizard is a 32-bit program, so you also need to manually place the 32-bit CyberGlove SDK DLLs (CGS_VirtualHandDevice.dll, CGS_VirtualHandCore.dll, etc...) in your Vizard script directory. |
We are using a CyberGlove Systems CyberTouch glove.
Ok so I uninstalled everything again to clean everything up, there were 32bit and 64bit versions of the SDKs installed. I use the cyberglove.dle extension now, and I installed the 64bit glove drivers from the CD. I placed the SDK DLLs from C:\Program Files\CyberGlove Systems\VirtualHand SDK\lib\winnt_386\Release into the same directory where my .py file is, but now I again get the error ** ERROR: Failed to load plug-in: 'CyberGlove.dle' But why? DCU is running, glove is shown and works perfectly fine, also the vibrator test. Just in vizard it does not work?! Do I have to install the 32bit SDK again? But then that is version 2.10, and now I have 3.1.1. Or maybe I just placed the wrong DLLs in my script folder or so? Quote:
|
No ideas? ==( :confused: :)
|
Ok it works now. I now use the 32bit version of the SDK.
|
Hello there, I am living in 2019 and facing the same problem. It is working perfectly in DCU not in vizard.
In my case virtual hand drivers are 64-bit and vizard is also of 64-bit. After virtual hand driver installation DLL files are saved in vizard's directory automatically no manual work. Still I am getting error message: ** ERROR: Failed to connect to CyberGlove. Make sure Device Manager is running. ** ERROR: Failed to create extension sensor with CyberGlove.dle Any suggestion what to try to get it sorted!! Thanks, |
All times are GMT -7. The time now is 02:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC