PDA

View Full Version : Shifted screen


tsgk
03-11-2010, 01:38 AM
Hi all,

In my setting the screen is shifted (i.e. the middle of the screen is not at the eyeheight of the participants).
Is there a way of communicating this to Vizard so it renders the scene appropriately?
I've tried searching for it in the Vizard help files but without any luck!

Thanks in advance!

Jeff
03-11-2010, 09:11 AM
Can you describe your hardware setup more? Are you using tracking?

tsgk
03-12-2010, 01:48 AM
I am not sure what you mean by using tracking. I am projecting the scene using a back projecting screen (2m by 1.5) which is 43.5cm above the ground. So, when people's eye-height is set to 1.05m that does not correspond to the centre of the display, but a bit lower than that, so the horizon is wrong.
I am recording eye-movements as well as the position within the scene. Is that any help?

Thanks!

farshizzo
03-12-2010, 09:47 AM
Have you tried adjusting the Y position of the main viewpoint?

tsgk
03-15-2010, 03:33 AM
When I change the Y position in viz.MainView only the eyeheight is affected. Do you mean change the pitch value in .setEuler?