Does vizard support milliseconds?

[lklab]

for example,
does vistask.waitTime(0.500) wait 500 ms?
does viztact.moveTo([1,2,3], time = 0.500) actually take 500ms?

Thanks!

[SivaKartheek]

hi,

in vizard all it supports in SI units ,So it takes vistask.waitTime(1) here is 1sec for furtur information check in the tutorial you will find it
If you want to use in milliseconds just convert into milli by a value then it will works

[lklab]

thank you!!