WorldViz User Forum  

Go Back   WorldViz User Forum > Precision Position Tracker (PPT)

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 11-27-2005, 02:02 PM
jpq jpq is offline
Member
 
Join Date: Nov 2005
Posts: 1
PPT talk button error: Failed to connect to COM4

When I start up the VizPPT software I get these messages:
# of adapters in this system : 2
Interface #1 type : 24
Interface #2 type : 6
MAC Address of interface #2: 004ca3a6b29


then when I press the talk button i get this:
Failed to connect to COM4

this used to start up the vrpn server but it stopped working and I have no idea why. Nothing has changed about the system settings as far as i know.
Reply With Quote
  #2  
Old 11-28-2005, 08:43 AM
tobin tobin is offline
WorldViz Team Member
 
Join Date: Feb 2003
Posts: 251
I'm not familiar with the warning messages you're seeing at startup.

Do you normally set your PPT to communicate via COM4? If you're usually using VRPN, then you ought to set that port as your communication port. You can adjust these settings in the "edit options" window which you can find by starting the calibration wizard.

Please let us know if you continue to have this problem.
Reply With Quote
  #3  
Old 12-05-2005, 07:51 PM
vanier vanier is offline
Member
 
Join Date: Dec 2005
Posts: 7
Send a message via AIM to vanier
connecting Vizard and PPT without a serial port

PPT is up an running and Vizard works fine on its own.

The problem is that my Vizard machine has no serial port. I bought a Radio Shack usb to serial adapter. It crashed for a while after I pressed Run. I'm afraid the Radio Shack adapter is not compatible with xp. After some playing around with setting in PPt... Now, vizard is recognizing com3 but the demo is not working. I'm using a ball demo for recognizing markers found on your website.

I would set up the vrpn network but I don't know how to set up a config file as listed in the help files for vrpn... Any suggestions?

Thanks, Luc.
__________________
Luc Vanier
Reply With Quote
  #4  
Old 12-08-2005, 02:36 PM
tobin tobin is offline
WorldViz Team Member
 
Join Date: Feb 2003
Posts: 251
You're really best off getting a serial comm to work. We reliably use a USB-serial adapter by Keyspan, which can be had any CompUSA and many other retailers.

That'd be my suggestion. But if you want to use VRPN with Vizard, however, you needn't deal with the CFG file because PPT acts as a VRPN server itself. You simply need to follow the instructions in the README file for the VRPN download. There is a problem, however, and that's that you have a version of PPT transmits a newer VRPN protocol than Vizard accepts. This is scheduled to be fixed by Q206 due simply to priorities. If it's important for you, simply say so and we'll schedule it for much sooner.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC