WorldViz User Forum  

Go Back   WorldViz User Forum > Vizard

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 04-06-2014, 12:23 AM
SUJITH_KJ SUJITH_KJ is offline
Member
 
Join Date: Mar 2014
Posts: 7
problem in updating text

Hi,
I have given my code below. In my program when i press 'w', the avatar walks to the position (0,0,5) and collides with box and prints the text 'santhosh'. When i press 'c' the avatar proceeds to the next position (0,0,15) and collides with box1 and prints the text 'sujith'. but the problem is tat the first text 'santhosh' still remains. I want it to vanish wen the avatar collides with the second box. Pls help me. I am doing a project. Pls help me. Thanks a lot

code:
import viz
import vizact
viz.phys.enable()
viz.setMultiSample(4)
viz.fov(60)
viz.go()
male = viz.addAvatar('vcc_male.cfg')
male.scale(3,3,3)

ground = viz.add('tut_ground.wrl')
ground.collidePlane()

env=viz.add(viz.ENVIRONMENT_MAP,'sky.jpg')
dome = viz.add('skydome.dlc')
dome.texture(env)

box = viz.add('box.wrl',scale=[2,2,2],pos=(0,0,5),color = viz.BLUE)
box.collideBox()
box.disable(viz.DYNAMICS)

box1 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(0,0,15),color = viz.RED)
box1.collideBox()
box1.disable(viz.DYNAMICS)

box2 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(-10,0,0),color = viz.RED)
box2.collideBox()
box2.disable(viz.DYNAMICS)

box3 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(-20,0,0),color = viz.RED)
box3.collideBox()
box3.disable(viz.DYNAMICS)

#textScreen = viz.addText('Press a',parent=viz.ORTHO,pos=[400,500,0],fontSize=50)


rHandBox = viz.add('box.wrl',scale=[1,1,1])
rHandBox.collideBox()
rHandBox.disable(viz.DYNAMICS)
rHandBox.enable(viz.COLLIDE_NOTIFY)
rHandLink = viz.link( male.getBone('Bip01 R Foot') , rHandBox )
#tweak the position of the box to cover the hand
rHandLink.preTrans([0.05,-0.5,0])


def onCollideBegin(g):
textScreen = viz.addText('Press a',parent=viz.ORTHO,pos=[400,500,0],fontSize=50)
textScreen.visible(viz.OFF)
if g.obj1 == rHandBox:
if g.obj2 == box:
box.color(viz.RED)
textScreen.message('santhosh')
textScreen.visible(viz.ON)
#textScreen.visible(viz.OFF)
#new=textScreen.message('somethin new')
#textScreen = viz.addText('Press a',parent=viz.ORTHO,pos=[400,500,0],fontSize=50)
#fun=textScreen.removeParent(textScreen)
#viz.callback(viz.COLLIDE_END_EVENT,onCollideBegin )
if g.obj1 == rHandBox:
if g.obj2 == box1:
box1.color(viz.BLUE)
#textScreen.visible(viz.OFF)
textScreen.message('sujith')
textScreen.visible(viz.ON)
#textScreen1 = viz.addText('Press x',parent=viz.ORTHO,pos=[400,500,0],fontSize=50)
if g.obj1 == rHandBox:
if g.obj2 == box2:
box2.color(viz.BLUE)
textScreen = viz.addText('Press c',parent=viz.ORTHO,pos=[100,0,0],fontSize=50)
if g.obj1 == rHandBox:
if g.obj2 == box3:
box3.color(viz.BLUE)
textScreen = viz.addText('Press r',parent=viz.ORTHO,pos=[400,200,0],fontSize=50)
viz.callback(viz.COLLIDE_BEGIN_EVENT,onCollideBegi n)


def wukavatar():
walk1 = vizact.walkTo([0,0,5])
male.addAction(walk1)
vizact.onkeydown('w',wukavatar)

def wakavatar():
walk2 = vizact.walkTo([0,0,15])
male.addAction(walk2)
vizact.onkeydown('c',wakavatar)
Reply With Quote
  #2  
Old 04-08-2014, 07:05 AM
Frank Verberne Frank Verberne is offline
Member
 
Join Date: Mar 2008
Location: Netherlands
Posts: 148
First of all, the next time you post your code, put code tags around your code so that indentation is preserved (which is essential for python code). You can do so by copy-pasting the code in the message field, selecting the code, and clicking the # symbol in the message tools. This way, other people can just take the code and run it, without having to figure out the indentation themselves. The chance that you get a timely response increases by doing so.

Second, I noticed that you posted the same question in a different (unrelated) thread. As bad as you would like to get help, there is no need to re-post the same question in a different thread, and especially not in an unrelated thread.

Third, your problem was that with every collision, a new textScreen variable was added, so they got layered instead of changed. I made a global variable for the collision function to solve the problem. Have a look at the manual of Vizard at http://s3.worldviz.com/pdf/Vizard%20...0Book%20R4.pdf. It describes very fundamental parts of Vizard, like the ones you're struggling with.

Code:
import viz
import vizact
viz.phys.enable()
viz.setMultiSample(4)
viz.fov(60)
viz.go()
male = viz.addAvatar('vcc_male.cfg')
male.scale(3,3,3)
ground = viz.add('tut_ground.wrl')
ground.collidePlane()
box = viz.add('box.wrl',scale=[2,2,2],pos=(0,0,5),color = viz.BLUE)
box.collideBox()
box.disable(viz.DYNAMICS)

env=viz.add(viz.ENVIRONMENT_MAP,'sky.jpg')
dome = viz.add('skydome.dlc')
dome.texture(env) 
box1 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(0,0,15),color = viz.RED)
box1.collideBox()
box1.disable(viz.DYNAMICS)

box2 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(-10,0,0),color = viz.RED)
box2.collideBox()
box2.disable(viz.DYNAMICS)

box3 = viz.add('box.wrl',scale=[1.5,1.5,1.5],pos=(-20,0,0),color = viz.RED)
box3.collideBox()
box3.disable(viz.DYNAMICS)

rHandBox = viz.add('box.wrl',scale=[1,1,1])
rHandBox.collideBox()
rHandBox.disable(viz.DYNAMICS)
rHandBox.enable(viz.COLLIDE_NOTIFY)
rHandLink = viz.link( male.getBone('Bip01 R Foot') , rHandBox )
#tweak the position of the box to cover the hand
rHandLink.preTrans([0.05,-0.5,0])

global textScreen
textScreen = viz.addText('Press a',parent=viz.ORTHO,pos=[400,500,0],fontSize=50) 
textScreen.visible(viz.OFF)

def onCollideBegin(g):
	global textScreen
	if g.obj1 == rHandBox:
		print 'collided'
	if g.obj2 == box:
		box.color(viz.RED)
		textScreen.message('santhosh')
		textScreen.visible(viz.ON)
	if g.obj2 == box1:
		box1.color(viz.BLUE)
		textScreen.message('sujith')
		textScreen.message
	if g.obj2 == box2:
		box2.color(viz.BLUE)
		textScreen = viz.addText('Press c',parent=viz.ORTHO,pos=[100,0,0],fontSize=50)
	if g.obj2 == box3:
		box3.color(viz.BLUE)
		textScreen = viz.addText('Press r',parent=viz.ORTHO,pos=[400,200,0],fontSize=50) 
viz.callback(viz.COLLIDE_BEGIN_EVENT,onCollideBegin)

def wukavatar(): 
	walk1 = vizact.walkTo([0,0,5])
	male.addAction(walk1)

vizact.onkeydown('w',wukavatar)

def walkAvatars():
	walk2 = vizact.walkTo([0,0,15])
	male.addAction(walk2)

vizact.onkeydown('c',walkAvatars)
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
input from a text file dig Vizard 5 10-20-2013 01:20 AM
Use saved text file data as replay sources problem mizutani_jun Vizard 4 10-14-2010 04:49 PM
Informationboxes with text snoopy78 Vizard 3 07-16-2009 10:23 AM
Vizard tech tip: Text to Speech Jeff Vizard 1 01-15-2009 09:39 PM
viz.lookat() with 3d text problem shivanangel Vizard 2 04-30-2007 02:34 PM


All times are GMT -7. The time now is 01:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2002-2018 WorldViz LLC