WorldViz User Forum  

Go Back   WorldViz User Forum > Precision Position Tracker (PPT)

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 12-17-2012, 11:48 AM
kparkins kparkins is offline
Member
 
Join Date: Dec 2012
Posts: 1
ppt-x plugin returned zero or less cameras, 0

I tested our WorldViz setup recently (PPT-x 3.14.5512) and had a healthy system that could track our space along with head orientation from an intersense inertiacube2. When I launched PPT-X today, the first thing it did was to ask for the serial numbers for the camera. The serial number text entry box was on top of a button which was inadvertently activated. When the program finished initializing, it said that it could not find any cameras and that the null plugin would be used instead. When I try to load the ppt-x plugin, the same thing happens, it scans for a second and then says no cameras found.

No problem, I thought, I had old configs so I copied that over the cfg file that was generated from the above session. The same thing ended up happening, no cameras. I double checked the serial numbers, and they were all correct in the cfg file:



I opened the transformer box to make sure that the fuses were okay and that the cameras were connected to the Matrox board. Everything looked good.

I then connected the cameras to an external monitor to make sure a signal was coming through the BNC connections. The cameras are all working.

Still though, the PPT-X program is not able to see the cameras.

I opened the Matrox utility to make sure that the board is working. I dumped the System Info and it showed a Matrox Morphis card. I can't get an image with Intellicam though.

At this point I'm stuck. It seems like an issue with the Matrox board, but I am uncertain on how to debug it. When I pull up the DCF file for the Morphis board, it only shows 1 tap and 1 camera, but maybe that's how it's supposed to be. I don't know.

Any suggestions?

Thanks
Reply With Quote
  #2  
Old 12-17-2012, 12:52 PM
Jeff Jeff is offline
WorldViz Team Member
 
Join Date: Aug 2008
Posts: 2,471
First thing to try is re-installing the Matrox drivers. Please contact support@worldviz.com and we'll help with that.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating a Vizard Sensor Plugin farshizzo Plug-in development 25 08-01-2019 12:24 AM
Multiple Cameras for AR artoolkit plugin Pho46 Vizard 3 11-10-2010 06:59 PM
PPT cameras not connected sisun1030 Precision Position Tracker (PPT) 0 03-05-2010 08:02 AM
PPT Studio - 3 of 4 Cameras not working sisun1030 Precision Position Tracker (PPT) 1 01-05-2010 02:29 PM
Could not find plugin to load objects... halley Vizard 1 05-30-2006 11:01 AM


All times are GMT -7. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC