#1
|
|||
|
|||
Inertia Cube 3 Wireless
I am using Inertia Cube 3 Wireless, connected to USB. How do I setup the usb ports? I have already connected 5DT gloves using
PORT_5DT_USB = 0 PORT_5DT_USB = 1 Is there a similar tag for Inertia Cube? Do I continue the numbering? |
#2
|
|||
|
|||
The intersense driver will assign a virtual port number to the wireless IC3. So you use the standard PORT_INTERSENSE flag to connect to it. You can use the DeviceTool program that comes with the Intersense drivers to find out what the virtual port number is.
|
#3
|
|||
|
|||
I am using the scaffold.py to test the Intersense IC3
The DeviceTool showed port 3 in use so I added PORT_INTERSENSE = 3 in the global section. Still the message comes out: ** ERROR: Failed to connect to intersense on port 3. Any ideas? |
#4
|
|||
|
|||
That should work, so I don't know what is going on. Is the InterSense Server program able to connect to the IC3 on port 3?
|
#5
|
|||
|
|||
Found the problem! While devicetool is running other programs cannot access the device! I thought that it only happened with the server. That simple...
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wireless InertiaCube3 with Vizard | mspusch | Vizard | 0 | 03-01-2005 02:31 AM |
generating images for panoramas using cube maps | bailenson | Vizard | 5 | 09-08-2004 08:32 PM |
Inertia Cube 2 initilization | UOL350 | Precision Position Tracker (PPT) | 1 | 08-11-2004 08:55 PM |
wireless communication devices and tracking | bailenson | Precision Position Tracker (PPT) | 1 | 07-20-2004 02:01 PM |
Inertia Cube | bstankie | Vizard | 1 | 03-24-2003 11:00 AM |