#1




The problem of tracker using via VRPN
Greetings to everyone!
We develop a small application in WorldViz. The viewport rotation must be implemented through 3DOF trackers in this application. Using embedded WorldViz driver for InterSense tracker, app works well. InterSense is used as follows: Code:
viz.go( viz.TRACKER ) tracker = viz.add( 'intersense.dls' ) vizact.onupdate( 0, UpdateView ) def UpdateView(): yaw, pitch, roll = tracker.getEuler() viz.MainView.setEuler( GetOrderedAndInvertedViewAngles( yaw, pitch, roll ), viz.BODY_ORI ) # Return ordered and inverted view angles depends on current settings def GetOrderedAndInvertedViewAngles( yaw, pitch, roll ): # order: if view_angles_order_1.get() == viz.DOWN: y = yaw p = pitch r = roll elif view_angles_order_2.get() == viz.DOWN: y = pitch p = yaw r = roll elif view_angles_order_3.get() == viz.DOWN: y = pitch p = roll r = yaw elif view_angles_order_4.get() == viz.DOWN: y = yaw p = roll r = pitch elif view_angles_order_5.get() == viz.DOWN: y = roll p = pitch r = yaw elif view_angles_order_6.get() == viz.DOWN: y = roll p = yaw r = pitch # invert: if view_angles_invert_yaw.get() == viz.DOWN: y = y if view_angles_invert_pitch.get() == viz.DOWN: p = p if view_angles_invert_roll.get() == viz.DOWN: r = r return [y, p, r] Code:
viz.go() vrpn = viz.add( 'vrpn7.dle' ) tracker = vrpn.addTracker( 'Head@localhost' ) def UpdateView(): yaw, pitch, roll = tracker.getEuler() viz.MainView.setEuler( GetOrderedAndInvertedViewAngles( yaw, pitch, roll ), viz.BODY_ORI ) # Return ordered and inverted view angles depends on current settings def GetOrderedAndInvertedViewAngles( yaw, pitch, roll ): # order: if view_angles_order_1.get() == viz.DOWN: y = yaw p = pitch r = roll elif view_angles_order_2.get() == viz.DOWN: y = pitch p = yaw r = roll elif view_angles_order_3.get() == viz.DOWN: y = pitch p = roll r = yaw elif view_angles_order_4.get() == viz.DOWN: y = yaw p = roll r = pitch elif view_angles_order_5.get() == viz.DOWN: y = roll p = pitch r = yaw elif view_angles_order_6.get() == viz.DOWN: y = roll p = yaw r = pitch # invert: if view_angles_invert_yaw.get() == viz.DOWN: y = y if view_angles_invert_pitch.get() == viz.DOWN: p = p if view_angles_invert_roll.get() == viz.DOWN: r = r return [y, p, r] 
#2




I believe the problem is that the VRPN server is sending the InterSense data in a different coordinate frame than Vizard's coordinate frame. You can use the swapQuat command on the VRPN tracker object to modify its coordinate system. I'm not sure what exact values you will need to correct the VRPN data, but here is how Vizard's builtin InterSense plugin swaps the quaternion data:
Code:
tracker.swapQuat([3,4,2,1]) 
#3




Thanks, this solution worked correctly at least for miniAHRS tracker via VRPN. I used exactly the same swap values for tracker.swapQuat(). We`ll test this solution for other trackers some time later.

Thread Tools  
Display Modes  Rate This Thread 


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
VRPN info  sdiverdi  Precision Position Tracker (PPT)  5  01162011 01:00 PM 
Problem with tracker after reboot  eugcc  Precision Position Tracker (PPT)  4  08042009 12:26 AM 
Does the vrpn7.dle tracker plugin clear the udp buffer?  michaelrepucci  Vizard  2  09192008 11:22 AM 
swapPos and swapQuat with VRPN  michaelrepucci  Vizard  1  07292008 12:27 PM 
problem with female animations  vmonkey  Vizard  1  10072005 11:36 AM 