WorldViz User Forum  

Go Back   WorldViz User Forum > Vizard

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 11-02-2016, 08:12 AM
VizMars VizMars is offline
Member
 
Join Date: Jan 2016
Posts: 40
Timing problem

Hi!
Please find attached a part of my code.
I use a EyeLink 1000 and so "el" stands for eyelink and represents the eyetracker object [el = pylink.EyeLink()]. The variable "ball" is a .osgb-file with a size of 25mb.
The function do_trial is called every trial in my experiment. I want the sound to be played 2 seconds after the ball appeared. But in the first trial of each block (and only in the first) the ball appears after the sound is played, otherwise it works just fine.
Does anybody know why this happens?

Code:
def el_rec_thread():
	while True:		
		#check recording status
		error = el.isRecording()  # First check if recording is aborted 
		if error != 0:
			end_el_trial()
			return error
			
		if inspect_over:				
			end_el_trial()	
			break
			
		#check if break pressed
		if(el.breakPressed()):	# Checks for program termination or ALT-F4 or CTRL-C keys
			end_el_trial()
			return pl.ABORT_EXPT
			
def end_el_recording(participant_id, block_num, trial):
	global inspect_over
	
	sound.play()
	optitrack.set_phase(POST_SOUND)
	msg_end = "%s Block %d Trial %d Ende %d" % ( participant_id, block_num, trial, int(round(viz.tick()*1000)) )   
	el.sendMessage(msg_end)
	inspect_over = True
	
def end_el_trial():
	'''Ends recording: adds 100 msec of data to catch final events'''
	pl.endRealTimeMode()  
	pl.pumpDelay(100)	   
	el.stopRecording()
	while el.getkey() : 
		pass

def do_trial(participant_id, block_num, trial, scale, distance):
	global inspect_over
	
	inspect_over = False 
	answer = -1 # set initial value to -1
		
	#optitrack.set_block(block_num)
	#optitrack.set_trial(trial)
	
	#This supplies the title of the current trial at the bottom of the eyetracker display
	msg_rec_status = "record_status_message 'Block %d, Trial %d/%d'" % (block_num, trial, N_TRIALS_EXC if (block_num == 0) else N_TRIALS_EXP)
	el.sendCommand(msg_rec_status)
	
	#defines the trial variables
	#MUST be sent to the EyeLink data file PRIOR TO the Trial Start message ("TRIALID ...")
	msg_trial_var = "TRIAL_VAR_LABELS %s %s %s" % ("Participant_ID", "Block_number", "Trial") 
	el.sendMessage(msg_trial_var)
	
	#Always send a TRIALID message before starting to record.
	#EyeLink Data Viewer defines the start of a trial by the TRIALID message.  
	#This message is different than the start of recording message START that is logged when the trial recording begins. 
	#The Data viewer will not parse any messages, events, or samples, that exist in the data file prior to this message.
	msg_trial_id = "TRIALID %s Block %d Trial %d" % (participant_id, block_num, trial) 
	el.sendMessage(msg_trial_id)
	
#	#Does drift correction and handles the re-do camera setup situations
#	###############################################################################
#	drift_target.visible(viz.ON)
#	yield viztask.waitFrame(1) #wait for the next frame to be drawn
#	while True:			
#		#Checks whether we are still connected to the tracker
#		if not el.isConnected():		 
#			viztask.returnValue(pl.ABORT_EXPT) 			
#		try:
#			error = el.doDriftCorrect(MONITOR_WIDTH // 2, MONITOR_HEIGHT // 2, 0, 0)			
#			if error == 0: 
#				break # if drift correction OK go on 				
#		except: # if re-calibration is necessary			
#			pl.openGraphics( (MONITOR_WIDTH, MONITOR_HEIGHT), 32 )
#			el.doTrackerSetup()    
#			pl.closeGraphics()	
#			break
#	drift_target.visible(viz.OFF)
#	###############################################################################
	
	#switch tracker to ide and give it time to complete mode switch
	el.setOfflineMode()
	pl.msecDelay(50) 
	
	#send trial variable data sometime in BETWEEN the TRIALID and TRIAL_RESULT messages
	msg_trial_data = "!V TRIAL_VAR_DATA %s %d %d" % (participant_id, block_num, trial)
	el.sendMessage(msg_trial_data)

	##start recording samples and events to edf file and over the link.
	#error = el.startRecording(1, 1, 1, 1)
	
	#start recording samples and events to edf file
	error = el.startRecording(1, 1, 0, 0)
	if(error != 0):	viztask.returnValue(error)
	#disable python garbage collection to avoid delays
	gc.disable()
	#begin the realtime mode
	pl.beginRealTimeMode(100)
	eye_used = el.eyeAvailable() #determine which eye(s) are available 
	if eye_used == BINOCULAR:		
		el.sendMessage("EYE_USED: 2 BOTH")
	else:
		print ("Error, not both eyes used!")
		viztask.returnValue(pl.TRIAL_ERROR)
		
	ball.setPosition( [0, 0, -distance] )  
	ball.setScale( [scale]*3 )	
	#determine trial start time	
	startTime = viz.tick()	
	ball.visible(viz.ON)
	#determine delay of the actual stimulus onset	
	drawTime = int( round((viz.tick() - startTime) * 1000) )	
	msg_start = "%s Block %d Trial %d Start %d" % ( participant_id, block_num, trial, int(round(viz.tick()*1000)) ) 
	el.sendMessage(msg_start)	
	el.sendMessage("SYNCTIME %d" %drawTime)		

	#reset keys and buttons on tracker
	el.flushKeybuttons(0)
	
	vizact.ontimer2(2, 0, end_el_recording, participant_id, block_num, trial) # repeats = Number of times to repeat the timer. If 0, the timer will be called only once
	rec_data = yield viztask.waitDirector(el_rec_thread)
	if rec_data.returnValue != None: # if not trial-over-case
		viztask.returnValue(rec_data.returnValue)
	
	#the call to the getRecordingStatus() method makes sure that 
	#no Abort menu operations remain to be performed, and generates the trial return code
	ret_value = el.getRecordingStatus()
	
	pl.endRealTimeMode()	
	
	
	###### etc ...
Reply With Quote
  #2  
Old 11-02-2016, 01:06 PM
Jeff Jeff is offline
WorldViz Team Member
 
Join Date: Aug 2008
Posts: 2,471
It's a bit difficult to debug without being able to run the script and reproduce the issue. Please see the guidelines for posting Vizard code as this will make it easier for others to help debug.

One thing you could try is to replace:
Code:
vizact.ontimer2(2, 0, end_el_recording, participant_id, block_num, trial)
with a viztask.waitTime() command that yields for 2 seconds and then calls the function. This will prevent later lines of code in the task function from executing until the two seconds has elapsed.
Reply With Quote
  #3  
Old 11-04-2016, 11:54 AM
VizMars VizMars is offline
Member
 
Join Date: Jan 2016
Posts: 40
Sorry, but I don't know how to provide a code that reproduces the issues without including the eyetracker commands. I excluded the other parts of the code because these are mainly functions that are used for the communication with the eyetracker.
Does
Code:
rec_data = yield viztask.waitDirector(el_rec_thread)
prevent later lines of code in the task function from executing until the timer expires? That poblem is that I need the el_rec_thread to check if the recording is aborted and for (EyeLink) program termination. If I use
Code:
yield viztask.waitTime(2)
then it seems impossible for me to implement this recording thread.
Reply With Quote
  #4  
Old 11-08-2016, 10:30 AM
VizMars VizMars is offline
Member
 
Join Date: Jan 2016
Posts: 40
Is there an event or function that can tell me whether the rendering of the world is finished?
Reply With Quote
Reply

Tags
rendering, timer

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vizard problem mizutani_jun Vizard 4 01-09-2011 03:39 PM
winviz.exe problem llqqff Vizard 2 07-16-2010 09:08 AM
PPT causing height problem just alex Precision Position Tracker (PPT) 2 01-30-2009 09:50 AM
export problem bazelaisr Vizard 2 05-28-2008 10:19 AM
problem with female animations vmonkey Vizard 1 10-07-2005 10:36 AM


All times are GMT -7. The time now is 02:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC