WorldViz User Forum  

Go Back   WorldViz User Forum > Precision Position Tracker (PPT)

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 08-30-2012, 06:17 AM
royb royb is offline
Member
 
Join Date: Aug 2012
Posts: 9
Manual/tutorial for new users? + a question

Hi, I recently started working with Vizard and the PPT. I fugired out how to work with Vizard from its very useful tutorial. Is there a similar tutorial/manual for the PPT software?
Specifically, it shows (after previously working fine) that only one of the cameras is active. Any idea what can cause it? How do I change it?
Thanks a lot,
Roy
Reply With Quote
  #2  
Old 08-30-2012, 10:04 AM
vizstan vizstan is offline
WorldViz Team Member
 
Join Date: Feb 2011
Posts: 13
Hi Roy,

PPT Manual

For.chm format:
In PPT Studio window, please go to the top menu Help -> Help

For .pdf format:
Go to the installation folder (default: C:\Program Files (x86)\WorldViz\PPTStudio33) and select ppt.pdf

In the "Cameras" panel (right hand side of the PPT Studio window), if you see the correct number of sub camera window shown but appears in white, you can simply right click on the particular windows and select "Active" to activate the cameras.
If you do not see the correct number of sub camera window shown (more likely to be PPT-E cameras), it is more likely that the cameras did not aquire their IP address from the DHCP server so the PPT could not detect it. In this case, you can simply open the DHCP server first (C:\Program Files (x86)\WorldViz\PPTStudio33\DHCP Server\Run-DHCP-Server.bat) and then power cycle the cameras (unplug the ethernet cable and plug it back in). It takes about 30 second or more to reboot the cameras and you will then see the DHCP winodws shown the IPs that are assigned to the cameras you just restart. At the last, restart the PPT Studio and make sure you have the correct camera plug-in (bottom left corner) seleted.

For more information, please refer to the "Hardware Installation" section of the PPT Manual.

best,
Stanley
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
question about NVIDIA 3D vision Weihua An Vizard 5 08-02-2010 06:49 AM
how to invoke command line question billjarrold Vizard 2 01-11-2010 08:51 AM
General question and question regarding arrays dan12345 Vizard 1 01-15-2008 10:15 AM


All times are GMT -7. The time now is 04:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC