WorldViz User Forum  

Go Back   WorldViz User Forum > Vizard

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 09-06-2004, 03:20 PM
bailenson bailenson is offline
Member
 
Join Date: May 2004
Posts: 35
moving viewpoint vs. translating Head_pos

Hello, what exactly is the difference between moving the Head_position using the viewpoint command:

view.move

and moving it by the translate command

viz.translate(viz.HEAD_POS)?

Do they do the exact same thing?

Thanks,

Jeremy
Reply With Quote
  #2  
Old 09-07-2004, 10:34 AM
mspusch mspusch is offline
WorldViz Team Member
 
Join Date: Feb 2003
Posts: 223
Hi Jeremy,

viz.translate(viz.HEAD_POS) is mostly there for backwards compatibility. It will translate the head position relatively to the current position.

viewpoint.translate will translate the head position either absolutely or relatively, depending on the optional fourth parameter. (The default is absolute)

viewpoint.move will translate the head position relative to the current orientation. So the following will move the viewpoint forward by 1 meter, no matter what the orientation is:
Code:
viewpoint.move(0,0,1)
Hope that clears it up
Reply With Quote
  #3  
Old 02-01-2005, 01:52 PM
JRichizzle JRichizzle is offline
Member
 
Join Date: Mar 2003
Location: Houston, TX
Posts: 43
moving viewpoint vs. moving environment

Which method of creating a motion simulation through an environment is more difficult to render? For instance, to create the illusion of moving down a hallway, I could:

1) Translate the hallway object (using object.translate or vizact.move) past a stationary viewpoint, or

2) Translate the viewpoint through a stationary hallway object.

Which is more efficient for real-time motion simulations? I have created motion simulations involving forward translation through a hallway with oscillatory roll rotations super-imposed. I translated the viewpoing using "viz.translate(viz.HEAD_POS)"... does this impose a great workload on the computer? Is rendering performance better when translating the object as opposed to the HEAD_POS?

-Jason
Reply With Quote
  #4  
Old 02-01-2005, 02:03 PM
farshizzo farshizzo is offline
WorldViz Team Member
 
Join Date: Mar 2003
Posts: 2,849
Hi,

There is no difference between translating an object versus the viewpoint as far as the graphics card is concerned. The end result is the same. In general it is more intuitive to translate the viewpoint, even more so when rotations are involved.
Reply With Quote
  #5  
Old 02-01-2005, 02:42 PM
JRichizzle JRichizzle is offline
Member
 
Join Date: Mar 2003
Location: Houston, TX
Posts: 43
Thanks...

What about using one method versus another?

E.g., viz.translate(viz.HEAD_POS) or view.move()
Reply With Quote
  #6  
Old 02-01-2005, 02:51 PM
farshizzo farshizzo is offline
WorldViz Team Member
 
Join Date: Mar 2003
Posts: 2,849
Hi,

viz.translate(viz.HEAD_POS) is different from view.move(). The first will translate the viewpoint relative to the global reference frame. The latter will translate the viewpoint relative to the local reference frame. view.move() requires more calculations, however the difference should be negligible.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC