WorldViz User Forum  

Go Back   WorldViz User Forum > Vizard

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 01-24-2012, 02:01 PM
Kaminski Kaminski is offline
Member
 
Join Date: Nov 2010
Posts: 36
Y Position different than 3.0

Hi All,

Did anybody experience any differences in Y positioning when going from Vizard 3.0 to 4.0?

We are using an intersense I-900, and although the position outputs the same, the viewpoint seems to be a couple of meters lower in the few scripts I have tested so far. I have tried experimenting with the eyeheight but it doesn't seem to change anything. It only happens when tracking is enabled. Anybody have this issue?
Reply With Quote
  #2  
Old 01-24-2012, 02:09 PM
farshizzo farshizzo is offline
WorldViz Team Member
 
Join Date: Mar 2003
Posts: 2,849
Are you linking the sensor to the viewpoint? In 3.0, the eyeheight would be added to the Y value of the link source, unless the viz.LINK_POS_RAW flag was used. In Vizard 4.0, this is not the case and the eyeheight is ignored when linking.
Reply With Quote
  #3  
Old 01-25-2012, 08:10 AM
Kaminski Kaminski is offline
Member
 
Join Date: Nov 2010
Posts: 36
I was linking and that seems to be the issue. Would the best way to modify old scripts be a postTrans on the link position, adding default eyeheight to the Y position?
Reply With Quote
  #4  
Old 01-25-2012, 11:26 AM
farshizzo farshizzo is offline
WorldViz Team Member
 
Join Date: Mar 2003
Posts: 2,849
Yes, you can use either the postTrans or setOffset commands to add an offset to the Y position.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
joystick position nmohandes Vizard 2 01-16-2012 10:03 AM
Dynamic Position and Radius of Sphere hotshotiguana Vizard 1 03-23-2011 12:53 PM
Translate view from sensor position to lens position? Kaminski Vizard 4 03-09-2011 10:36 AM
writing joystick position to a data file Saz Vizard 3 12-17-2008 05:18 AM
Avatar always returns in initial position pattie Vizard 2 08-31-2006 08:15 PM


All times are GMT -7. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC