WorldViz User Forum  

Go Back   WorldViz User Forum > Vizard

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-18-2011, 03:23 PM
pkhoosh pkhoosh is offline
Member
 
Join Date: Feb 2005
Posts: 21
Send a message via AIM to pkhoosh Send a message via Yahoo to pkhoosh
connecting to SMI iViewX running a RED tracker

Hi,

I followed the hardware reference for connecting to the SMI eye tracker using iViewX, but there are no changes to the XY pupil position that I'm printing in Vizard. I'm assuming the values it prints should change a little because my is moving. It just prints [0.0, 1.0, 0.0] for the normalized data (and [0 1023 0] for the raw pixel value). A related question: Why is the output a 3 element vector (and not just two for the XY?)?

Let me describe our setup. We have the SMI laptop that runs iView X (address= 192.168.10.1, port=4444).

We have another computer running Vizard (address=192.168.10.7, port=5555) and the SMI Experiment Center (to which we need to connect for the study; we configure this with remote interface 2 in iViewX).

According to the Vizard help instructions, I setup the hardware section of iViewX to communicate to remote interface 1 via Ethernet. The iViewX network config is set to listen to 192.168.10.1 (port 4444), which is the laptop running iViewX, and send UDP packets to 192.168.10.7, which is the Vizard computer. According to the Vizard reference, I set the port value for both listening and sending as 4444 (the iView laptop). (What's the logic behind that?)

Am I missing something? The tracker is a RED4 using FireWire.

pete
Reply With Quote
 

Tags
eyetracking, iview, smi

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Intersense wand and Head tracker blessonisaac Vizard 0 01-10-2011 03:39 PM
The problem of tracker using via VRPN _kj_ Vizard 2 08-13-2009 12:03 AM
Simple Head Tracker PHart Vizard 1 05-10-2009 05:35 PM
Interface with Tobii Eye Tracker Uttama_vizard Precision Position Tracker (PPT) 1 12-12-2007 11:31 AM
Problems running R3 and R2.5 on the same computer cade_mccall Vizard 5 09-05-2006 11:26 AM


All times are GMT -7. The time now is 12:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC