WorldViz User Forum

WorldViz User Forum (https://forum.worldviz.com/index.php)
-   Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)
-   -   Tightening a screw scenario (https://forum.worldviz.com/showthread.php?t=967)

AlyssaK 01-07-2007 10:40 PM

Tightening a screw scenario
 
Hi everyone,

I'm trying to simulate the scenario of tightening a screw. I have been using a pretty basic wrl file which looks like a pole with a flat edge. Would anyone have a wrl file they could upload to look more realistic? I would like to see the actual thread of the screw.

I've also been having a little bit of trouble with the co-ordinates. I would like the screw to be positioned with the thread of the screw closest to the desired location and the top flat edge in the users view. (As if i was performing this operation myself). I've been able to get the top of the screw touching the location but on an angle.

Are there any examples of this scenario that i have overlooked?

Thanks! Alyssa.

Gladsomebeast 01-08-2007 09:26 AM

Sounds like you need some 3D artist skills. With modeling software, like 3ds Max, you could create a screw model and position it in relation to the hole. You can also try using Vizard's "stage" feature to position the screw.

Jerry 01-11-2007 11:15 AM

1 Attachment(s)
Here's a good screw.

AlyssaK 01-28-2007 09:27 PM

Would anyone happen to have a wrl file of a washer (or any other vizard supported file format.) they could post?

I haven't used the software packages available to create these type of objects before and only need basic examples (at this stage...).

Thanks.

Gladsomebeast 01-29-2007 09:57 AM

Of couse, you can use a stand in object for your programming efforts. Perhaps the scaled box.wrl object included in the Vizard install would do?


All times are GMT -7. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 2002-2023 WorldViz LLC