WorldViz User Forum

WorldViz User Forum (https://forum.worldviz.com/index.php)
-   Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)
-   -   Regarding a 2 Walled(Left Wall n Right Wall) Projectn with Ground(Floor) Projectn (https://forum.worldviz.com/showthread.php?t=5934)

rajnishv 01-10-2017 05:45 AM

Regarding a 2 Walled(Left Wall n Right Wall) Projectn with Ground(Floor) Projectn
 
1 Attachment(s)
Hi Jeff,
I am developing a vizard demo,in which i have to achieve the following VR Corner Cave SetUp Topology.

1)I want my projections should be on the 2 walls (RIGHT wall and LEFT Wall) and also the GROUND(floor).

2)There are 4 PPT Cameras of which 2 cameras are installed at the above the corners of the LEFT wall and the RIGHT wall with 1 camera above at extreme top-left of the LEFT Wall and also 1 camera above at extreme top-right of the RIGHT wall.

To achieve:
I have achieved 2 walled projection,but i want projection on LEFT wall,RIGHT wall and also on the GROUND to give a actual feel and perpective of the VR Environment with full immersion.


Which setup or presets or any configuration do i have to choose from the vizconnect GUI to achieve the following setup with proper trackers configuartion?

PFA of the setup topology of what i have to achieve using Vizard.

Pls assist me further.

Waiting for your reply.

rajnishv 01-24-2017 11:28 PM

Hi Jeff,

Do i have to follow the same methodology as reply mentioned by you in my post in the below link ?

Post Link:

http://forum.worldviz.com/showthread.php?t=5783


All times are GMT -7. The time now is 04:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2002-2018 WorldViz LLC