WorldViz User Forum - Intersense reset

WorldViz User Forum (https://forum.worldviz.com/index.php)

- Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)

- - Intersense reset (https://forum.worldviz.com/showthread.php?t=1190)

Intersense reset

According to the help documentation, if I do

ori = viz.add('intersense.dls')
ori.command(2)

ori.get() should come back 0,0,0 for yaw, pitch, and roll, but this
does not happen.

Is there something I'm missing or is this a bug?

The command you are issuing will perform all subsequent resets in a local reference frame. You will have to issue a reset() command afterwards and wait a frame for the intersense data to be updated.

That still doesn't work. If I do this:

ori = viz.add('intersense.dls')
ori.command(2)
ori.reset()
print ori.get()

the values of yaw, pitch, and roll are not equal to zero.

What I want to do is zero all three axes.

Are you waiting a frame so the intersense data is updated before issuing the reset command?

Yes. I have reset() and command() assigned to different
keys. I press the command() key and then, after waiting for
what must be longer than one frame, I press the reset() key.

Sorry, I forgot to mention that these reset modes only work when the intersense is in quaternion mode. After adding the intersense you will need to issue the following command:

Code:

isense.quat()

Also, the built-in link objects already support these reset modes. I would recommend using them since it is independent of the actual hardware. Here is an example script that shows how to use the different link reset modes with an intersense:

Code:

import viz

viz.go()



#Add ground

ground = viz.add('tut_ground.wrl')



#Add intersense

PORT_INTERSENSE = 1

isense = viz.add('intersense.dls')



#Add node

node = viz.add('marker.wrl')

node.translate(0,1.5,4)

viz.startlayer(viz.LINES)

viz.vertexcolor(viz.RED)

viz.vertex(0,0,0)

viz.vertex(0,0.5,0)

viz.endlayer(parent=node)



#Link sensor to node

link = viz.link(isense,node)



#Create keyboard events

vizact.onkeydown('r',isense.reset)

vizact.onkeydown('1',link.reset,viz.RESET_ORI_LOCAL)

vizact.onkeydown('2',link.reset,viz.RESET_ORI_WORLD)

vizact.onkeydown('3',link.reset,viz.RESET_ORI_RAW)