WorldViz User Forum

WorldViz User Forum (https://forum.worldviz.com/index.php)
-   Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)
-   -   Walk (https://forum.worldviz.com/showthread.php?t=5136)

roobert 08-14-2014 12:05 PM

Walk
 
I'm using the kinect and want to know if you can walk through a scene for example (piazza.osgb) with my motion detection.

There is some information about this...

Jeff 08-15-2014 02:10 PM

Yes, you can link the viewpoint to the kinect head sensor. If you're going to be using this for head tracking we recommend using a separate orientation sensor (e.g. inertial sensor) for smoother orientation updates.

roobert 08-15-2014 03:26 PM

Jeff.

no doubt, you are a genius.

Thank you.

roobert 08-15-2014 04:55 PM

If I use a model eg(piazza.osgb) the model position is in middle of my body, How I put the floor model put on my feet?

Jeff 08-18-2014 02:41 PM

It sounds like the head sensor height you're getting is too low. Can you post the code you're using?

roobert 08-18-2014 04:39 PM

I am use Kinect.
I can not see the hands, does the kinect not detect distances?

Quote:

import viz
import vizshape

viz.go()
lugar=viz.add('piazza.osgb')

vrpn = viz.addExtension('vrpn7.dle')

Cabeza = vrpn.addTracker( 'Tracker0@localhost',0)
l = viz.link(Cabeza,lugar)

HeadRigth=vrpn.addTracker( 'Tracker0@localhost',14 )
ManoDerecha=viz.add('hand_gloved_R.osgb',scale=[.5,.5,.5])
md=viz.link(HeadRigth,ManoDerecha)

HeadLeft=vrpn.addTracker( 'Tracker0@localhost',8 )
ManoIzquierda=viz.add('hand_gloved_L.osgb',scale=[.5,.5,.5])
mi=viz.link(HeadLeft,ManoIzquierda)

Jeff 08-19-2014 07:07 PM

If you test with the script at the bottom of the following article and move the viewpoint do you see all the tracker points in Vizard?

http://kb.worldviz.com/articles/1584


All times are GMT -7. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2002-2018 WorldViz LLC