WorldViz User Forum - physics problem

WorldViz User Forum (https://forum.worldviz.com/index.php)

- Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)

- - physics problem (https://forum.worldviz.com/showthread.php?t=3542)

hey, first time poster here

currently, i'm trying to setup a balance board type apparatus that includes the board, and a ball that rests on the center. the board tilts up and down and is controlled by a wii remote controller. as the board tilts, the ball rolls down accordingly. all that is working fine and dandy, but a problem keeps occuring where the ball suddenly drops through the board, and i haven't been able to figure out why. i've tried playing with the density, bounce, and hardness of both the board and the ball, but still no luck.

here's my script so far:

Code:

#create balance board

bar = vizshape.addBox(size=(20, 1,1))

bar.setPosition([0,2,5])

bar.color(1,0,0)

barCollideShape = bar.collideMesh()



#create ball

ball = viz.add('ball.wrl')

ball.setScale([1.5,1.5,1.5])

ball.setPosition([0, 7, 5])

ballCollideShape = ball.collideSphere()

as well as the scrip for the wii remote controls:

Code:

#Add wiimote extension

wii = viz.add('wiimote.dle')



#Connect to first available wiimote

w = wii.addWiimote() 

def updateWiiMote():

        w.led = wii.LED_1 | wii.LED_4

        x,y,z = w.getAccel()

        x,y,z = threshIt(x,y,z)



        newEuler = (0,0,-x*10)

        print newEuler

        bar.setEuler(newEuler)

        

        

#poll joystick continuously

vizact.ontimer(0, updateWiiMote)

and i also created "guardrails" in front of and behind the balance board, to keep the ball from rolling off on the z-axis:

Code:

#create rear guiderail

farGuiderail = vizshape.addBox([30, 50, .01])

farGuiderail.setPosition([0,2,5.5])

farGuiderailMesh = farGuiderail.collideMesh()

farGuiderail.disable(viz.RENDERING)

farGuiderail.disable(viz.DEPTH_WRITE)



#creat front guiderail

nearGuiderail = vizshape.addBox([30, 50, .01])

nearGuiderail.setPosition([0,2,4.5])

nearGuiderailMesh = nearGuiderail.collideMesh()

nearGuiderail.disable(viz.RENDERING)

nearGuiderail.disable(viz.DEPTH_WRITE)

any help would be greatly appreciated. thanks in advance

Try using a collideBox for the bar. Does that work?

Code:

barCollideShape = bar.collideBox()

bar.disable(viz.DYNAMICS)

The bar's collideMesh has no thickness to it. If the ball is moving fast and the physics engine does not detect the collision between the ball and bar one frame the ball will fall through.

I tried the collide box but abandoned it because it made the balance board fall to the ground. I guess i could try using a fulcrum to support the board...

Code:

bar.disable(viz.DYNAMICS)

will prevent forces like gravity from affecting the bar.

thanks, but i'm still having the same problem. the ball passes through the balance board quite easily...

In order to get the bar and the ball to collide correctly you'll need to move the bar by applying a force or torque to it:

Code:

import viz

import vizact

viz.go()



viz.phys.enable()



bar = viz.add('box.wrl')  # Add a box

bar.setScale(20,1,1) # Make it look more door like

shape = bar.collideBox() # Enable physics on the box

shape.setDensity(0.1)



ball = viz.add('ball.wrl')

ball.setScale([1.5,1.5,1.5])

ball.setPosition([0, 2, 0])

ballCollideShape = ball.collideSphere()



joint = viz.phys.addHingeJoint(bar,None,pos=[0,0,0],axis0=[0,0,1]) # Hinge joint attached to world



def push():

    bar.applyTorque([0,0,20],duration=0.2)

vizact.onkeydown('1',push)



def pushBack():

    bar.applyTorque([0,0,-20],duration=0.2)

vizact.onkeydown('2',pushBack) 



def resetSimulation():

    if ball.getPosition()[1] < -5:         

        ball.reset()

        ball.setPosition([0, 2, 0])

        bar.reset()

        bar.setEuler([0,0,0])

    

vizact.ontimer(1,resetSimulation)



import vizcam

vizcam.PivotNavigate(center=[0,0,0],distance=30)

i'm going to give this a try.

i was originally having the bar via the wiimote. so as the wiimote moved, the euler of the bar moved accordingly. could that be the reason, or at least one of the reasons why the ball kept falling through?

To make sure the physics engine calculates the collisions correctly you should apply a force or torque to the bar rather than manually setting it's orientation using the setEuler command. You can still use the wiimote data to decide what torque to apply.

it works :D

thanks so much for all your help, much appreciated!