WorldViz User Forum - Temporal delay on movement

WorldViz User Forum (https://forum.worldviz.com/index.php)

- Vizard (https://forum.worldviz.com/forumdisplay.php?f=17)

- - Temporal delay on movement (https://forum.worldviz.com/showthread.php?t=4518)

westbyb

03-14-2013 04:26 PM

Temporal delay on movement

I was wondering if there was a way to delay the input sent for movement. I'm using vizcam.addWalkNavigate() to control my movement currently, and I was wondering if there was a way to have my movement be slightly delayed from my actual input, so that I can, for example, press the key to move forward and then a second or two later, the movement would actually occur.

Thanks in advance!

Jeff	03-15-2013 06:49 AM

You could try something like the following:

Code:

import viz

import vizact

import vizcam



viz.go()



DELAY = 2

dojo = viz.add('dojo.osgb')

walkNav = vizcam.addWalkNavigate()



recordedData = []

def RecordTrackingData():

        recordedData.append( (walkNav.getPosition(), walkNav.getQuat()) )

vizact.onupdate(0,RecordTrackingData)



def ApplyTrackingData():

        pos,ori = recordedData.pop(0)

        viz.MainView.setPosition([pos[0],1.8,pos[2]])

        viz.MainView.setQuat(ori)

        

ApplyDataCallback = vizact.onupdate(0,ApplyTrackingData)

ApplyDataCallback.setEnabled(viz.OFF)



vizact.ontimer2(DELAY,0,ApplyDataCallback.setEnabled,viz.ON)

westbyb

05-21-2013 03:20 PM

Fantastic! That worked for using addWalkNavigate, but I'm now using VRPN 7 to get location data, as such:

Quote:

vrpn = viz.add('vrpn7.dle')
headPos = vrpn.addTracker( 'PPT0@'+PPT_MACHINE,0)
iLabs = viz.addExtension( 'inertiallabs.dle' )
headOri = iLabs.addSensorBus(port=INERTIALLABS_HEAD_PORT)[0]

I've tried subbing these values into the code that worked previously, but it's seeming that won't be possible. How should I go about implementing the same idea using vrpn?

Jeff	05-21-2013 05:46 PM

Are you getting any errors? Can you post the code you tested with?

westbyb

05-23-2013 02:41 PM

No errors, but here's the code I'm working with:

Quote:

viztracker.go()
recordedData = []
def RecordTrackingData():
recordedData.append( (headPos.getPosition(), headOri.getQuat()) )
vizact.onupdate(0,RecordTrackingData)

def ApplyTrackingData():
pos,ori = recordedData.pop(0)
viz.MainView.setPosition([pos[0],1.8,pos[2]])
viz.MainView.setQuat(ori)

ApplyDataCallback = vizact.onupdate(0,ApplyTrackingData)
ApplyDataCallback.setEnabled(viz.OFF) #OFF

vizact.ontimer2(TIME_DELAY,0,ApplyDataCallback.set Enabled,viz.ON) #ON

I imagine that switching from viz.go() to viztracker.go() is what's causing the issue. I swapped viz.OFF/ON with viztracker.OFF/ON with no results.

Jeff	05-23-2013 06:06 PM

The manual setting of the viewpoint in your script is overridden by the viewpoint link defined in the viztracker file. For this custom viewpoint movement its probably best to configure the trackers in this script and not use viztracker.

All times are GMT -7. The time now is 03:48 PM.