|
|
|
|
#1
10-17-2006, 02:27 AM
|
|||
|
|||
|
Ok, I've used that tutorial with and without the HMD and using the male and female bodies with the default head, villain, and a custom female head. In every instance there are no display problems, no freezes, and the head doesn't slide depending on viewpoint, but all the heads appeared smaller than they should be. I'd say probably about 2/3 of the correct size.
[edit] I've talked to the technicians here and it seems that there might be a problem with how the NVidia drivers are dealing with stereo viewing. I'm going to turn stereo off and see if the problem persists, but I'm not going to be able to do that until tomorrow. Last edited by Plymouth; 10-17-2006 at 06:14 AM. 
|
|
#2
10-20-2006, 03:39 AM
|
|||
|
|||
|
another update
So there seems to be a few different problems. I turned off the Stereo setting in NVidia's settings and that stops nearly all the problems. The head no longer slides and the no heads cause crashes. But the problem still remains that all the male heads are displaying as too small. So I'm wondering what might be behind the head-size problem. And if you have any idea what I might be able to do to fix the stereo problem let me know. I'm fairly sure all the drivers are current, but I'll check that again and make sure the settings are all correct.
|
 |
|
|
Hybrid Mode
